ALUJET Alucral
ALUJET Alucral adhesive tape is used to make airtight joints at overlapping areas of vapour check membranes.
ALUJET Alucral adhesive tape is used to make airtight joints at overlapping areas of vapour check membranes. Through the use of a solvent-free acrylate dispersion, joints are possible from -10°C upwards. If ALUJET Alucral adhesive tape is used correctly, a vapour check function is also ensured in the overlapping area.
Commercially-available vapour checks; wood; hard wooden composite boards; gypsum fibreboards; gypsum plasterboards.
| Test | Standard | Unit | Value |
| Substrate | Special paper | ||
| Adhesive | Acrylat | ||
| Backing | Siliconised paper | ||
| Temperature resistance | °C | -40 bis +90 | |
| Processing temperature | °C | From 5 upwards | |
| Thickness | DIN EN 1942 | mm | 0,29 ±0,05 |
| Elongation | DIN EN 14410 | % | >5 |
| Breaking force | DIN EN 14410 | N / 10 mm | 65 |
| Adhesion on steel | DIN EN 1939 | N / 10 mm | 14 |
Roll width: 60 mm
Roll length: 41 m
Carton content: 8 rolls
Palette content 54 carton
At approx. 15 °C to 30 °C and max. 65% rel. humidity
According DIN 4108-11 (Klebeband KB); extremely high adhesive strength; modified acrylate dispersion; solvent-free; handy dimensions.
